Includes
• 2×Bracket(Galvanized)
• 2×Extension rod(430 stainless steel)
• 1×Rotating rod(430 stainless steel)
• 1×USB DC motor
• 4×Forks(430 stainless steel) with thumb screws(430 stainless steel)
• 1×Nylon Handle
• 1×Instructions
Dimension
Supports ovens(BBQ stoves) with inner diameters below 78cm(30.7”). They all clamping ovens(BBQ stoves) wall thickness are not exceeding 50mm(1.95”).
Bracket
Bracket using 2mm thickness Galvanized steel plate, with three heights, and using thread locking devices.
USB DC Motor
• Output : 5RPM
• Voltage: DC 5V(With 1 meter USB wire)
• Rotator Port : 0~5.0kgf.cm(0~11 lbs)
• Roast Branch Size: 8 * 8mm / 0.32 * 0.32in
• Motor Size: 6.8 * 5.8 *6.5cm / 2.7 * 2.3* 2.6in
Normal Misalignment
Note: Thread processing needs to have a certain clearance, so it is difficult to have the same plane after the rod is tightened, and there will be a normal misalignment. At this time, you only need to loosen the rod a little, then put on the fork to the rod after the plane coincides. Tighten the rod after all the food is loaded.
About Power Bank
Note: Many power banks on the market have over-current protection functions. When the motor is used, the current passing through increases as the load increases. Once the allowable current is exceeded, the power bank will automatically cut off the power, which will cause the motor to stop, which is not the quality of the motor.
MOTOR WITHOUT BATTERY
The motor does not have a battery, you need to bring your own power bank or mobile phone charger for power supply.
Because the motor is generally used in a high temperature environment, the built-in lithium battery is prone to explosion hazard.
